您当前的位置: 网站首页 > 产品展厅 >PA66 PA6 PA46 PA9T >矿物/玻纤40增强 热稳定PA66 73GM40 NC010

产品介绍

矿物/玻纤40增强 热稳定PA66 73GM40 NC010
物品单位 价格 品牌
千克 35 杜邦
  • 货号:73GM40 NC010
  • 发布日期: 2022-03-18
  • 更新日期: 2022-03-18
产品详细说明
品牌 杜邦
货号 73GM40 NC010
牌号 73GM40 NC010
型号 73GM40 NC010
品名 PA66
外形尺寸 颗粒
产品用途 注塑成型
生产企业 杜邦
是否进口

DuPont™ Minlon® 数据
杜邦™minlon® 数据
mineral reinforced nylon resin
矿物增强尼龙树脂

Minlon ® 73GM40 NC010 is a 40% mineral/glass reinforced, heat stabilized polyamide 6 resin for injection molding.
minlon®73GM40 NC010是40%矿物/玻璃纤维增强,热稳定尼龙6树脂注塑成型。

Property
Test Method
Units
Value
DAM
50%RH
Identification
Resin Identification
Part Marking Code
ISO 1043
ISO 11469
 
PA6-(MD+GF)40
>PA6-(MD+GF)40<
 
Mechanical
Stress at Break
Strain at Break
Tensile Modulus
Notched Charpy Impact Strength
-30°C (-22°F)
23°C (73°F)
Unnotched Charpy Impact Strength
-30°C (-22°F)
23°C (73°F)
ISO 527
ISO 527
ISO 527
ISO 179/1eA
ISO 179/1eU
MPa (kpsi)
%
MPa (kpsi)
2
kJ/m
2
kJ/m
140 (20.3)
3
8300 (1200)
5.5
7
50
60
80 (11.6)
6
4600 (670)
4
12
50
65
Thermal
Deflection Temperature
1.80MPa
Melting Temperature
10°C/min
CLTE, Parallel
23 - 55°C (73 - 130°F)
CLTE, Normal
23 - 55°C (73 - 130°F)
Vicat Softening Temperature
50N
ISO 75-1/-2
ISO 11357-1/-3
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
°C (°F)
°C (°F)
E-4/C (E-4/F)
E-4/C (E-4/F)
°C (°F)
195 (383)
221 (430)
0.41 (0.23)
0.77 (0.43)
212 (414)
 
Property
Test Method
Units
Value
DAM
50%RH
Other
Density
Water Absorption
Equilibrium 50%RH
Saturation, immersed
Molding Shrinkage
Normal, 2.0mm
Parallel, 2.0mm
ISO 1183
ISO 62, Similar to
ISO 294-4
3      3
kg/m (g/cm )
%
%
1460 (1.46)
1.6
5.6
0.7
0.5
 
Processing
Melt Temperature Range
Melt Temperature Optimum
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Moisture Content
 
°C (°F)
°C (°F)
°C (°F)
°C (°F)
h
°C (°F)
%
260-280 (500-535)
270 (520)
70-120 (160-250)
100 (210)
2-4
80 (175)
<0.20
 

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
Test temperatures are 23°C unless otherwise stated.

返回
顶部