您当前的位置: 网站首页 > 产品展厅 >PA66 PA6 PA46 PA9T >玻纤14% 增韧 热稳定PA66 80G14AHS NC010

产品介绍

玻纤14% 增韧 热稳定PA66 80G14AHS NC010
物品单位 价格 品牌
千克 35 杜邦
  • 货号:80G14AHS NC010
  • 发布日期: 2022-03-18
  • 更新日期: 2022-03-18
产品详细说明
品牌 杜邦
货号 80G14AHS NC010
牌号 80G14AHS NC010
型号 80G14AHS NC010
品名 PA66
外形尺寸 颗粒
产品用途 注塑
生产企业 杜邦
是否进口

DuPont Zytel® nylon resin
杜邦Zytel® 尼龙树脂
Toughened Resins
增韧树脂

Zytel® 80G14AHS NC010 is a 14% glass fiber reinforced, toughened, high flow, heat stabilized polyamide 66 resin. It offers outstanding performance in injection molding applications.
zytel®80G14AHS NC010 是14%玻璃纤维增强,增韧,高流量,热稳定聚酰胺66树脂。它提供了在注塑应用中表现出色。

Property
Test Method
Units
Value
DAM
50%RH
Identification
Resin Identification
Part Marking Code
ISO 1043
ISO 11469
 
PA66-IGF14
>PA66-IGF14<
Mechanical
Stress at Break
Strain at Break
Tensile Modulus
Flexural Modulus
Notched Charpy Impact Strength
-40(-40)
-30(-22)
23(73)
Unnotched Charpy Impact Strength
-30(-22)
23(73)
ISO 527
ISO 527
ISO 527
ISO 178
ISO 179/1eA
ISO 179/1eU
MPa (kpsi)
%
MPa (kpsi)
MPa (kpsi)
2
kJ/m
2
kJ/m
110 (16.0)
3.8
5000 (725)
4400 (640)
9
13
73
72 (10)
9
3300 (480)
3120 (450)
6
7
17
71
76
Thermal
Deflection Temperature
1.80MPa
Melting Temperature
10°C/min
ISO 75-1/-2
ISO 11357-1/-3
()
()
240 (464)
263 (505)
 
Property
Test Method
Units
Value
DAM
50%RH
Electrical
Dissipation Factor
1E2 Hz
IEC 60250
E-4
270
180
Flammability
Flammability Classification
0.75mm
1.5mm
3.0mm
Flammability Classification
0.75mm
1.5mm
3.0mm
IEC 60695-11-10
UL94
 
HB
HB
HB
HB
HB
HB
 
Other
Density
Molding Shrinkage
Normal, 2.0mm
Parallel, 2.0mm
ISO 1183
ISO 294-4
3           3
kg/m (g/cm )
%
1190 (1.19)
0.8
0.7
 
Processing
Melt Temperature Range
Melt Temperature Optimum
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Moisture Content
 
()
()
()
()
h
()
%
285-305 (545-580)
295 (565)
50-100 (120-210)
80 (175)
2-4
80 (175)
<0.20
 

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.

返回
顶部