您当前的位置: 网站首页 > 产品展厅 >PP PE >PP MFD02 含玻璃纤维和碳粉

产品介绍

PP MFD02 含玻璃纤维和碳粉
物品单位 价格 品牌
千克 15 液氮
  • 货号:MFD02
  • 发布日期: 2022-03-14
  • 更新日期: 2022-03-14
产品详细说明
品牌 液氮
货号 MFD02
特性级别 增强级|||高强度|||
牌号 MFD02
型号 MFD02
加工级别 注塑级|||
品名 PP
外形尺寸 颗粒
产品用途 注塑
用途级别 通用级|||
生产企业 液氮
是否进口

LNP* STAT-KON* COMPOUND
LNP STAT-KON RESIN ALL SERIES
LNP* Stat-Kon* composites contain electrically conductive additives. They and span a broad range of surface resistivity and electrical activity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding. Stat-Kon* composites offer cost-effective solutions when products must avoid static electricity buildup or discharge. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.

LNP™ STAT-KON™ Compound PP MFD02 塑料物性表

Also known as:LNP™ Stat-kon™ Compound MF-10 Product reorder name:MFD02
LNP* Stat-kon* MFD02 is a compound based on Polypropylene resin containing Glass Fiber, Carbon Powder. Added features of this material include: Electrically Conductive.

MECHANICAL Value Unit Standard
Tensile Stress,yield 280 kgf/cm2 ASTM D 638
Tensile Stress,break 210 kgf/cm2 ASTM D 638
Tensile Strain,yield 3.2 % ASTM D 638
Tensile Strain,break 6.1 % ASTM D 638
Tensile Modulus,50mm/min 28100 kgf/cm2 ASTM D 638
Flexural Modulus 21000 kgf/cm2 ASTM D 790
Tensile Stress,yield 28 MPa ISO 527
Tensile Stress,break 23 MPa ISO 527
Tensile Strain,yield 2.9 % ISO 527
Tensile Strain,break 4.1 % ISO 527
Tensile Modulus,1mm/min 2430 MPa ISO 527
Flexural Stress 43 MPa ISO 178
Flexural Modulus 2200 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 38 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 13 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 170 cm-kgf ASTM D 3763
Multiaxial Impact 121 cm-kgf ISO 6603
Izod Impact,unnotched 80*10*4 +23℃ 27 kJ/m2 ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 15 kJ/m2 ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 133 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 85 ASTM D 648
CTE,-40℃ to 40℃,flow 1.03E-04 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 6.48E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 1.03E-04 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 6.40E-05 1/℃ ISO 11359-2
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 127 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 81 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.05 g/cm3 ASTM D 792
Mold Shrinkage,flow,24 hrs(5) 1.1-1.3 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 1.1-1.3 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 1.2 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 1.2 % ISO 294
Density 1.05 g/cm3 ISO 1183
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+01-1.E+03 Ohm ASTM D 257

Parameter Injection Molding Value Unit
Drying Temperature 80
Drying Time 4 hrs
Melt Temperature 225-250
Front-Zone 3 Temperature 240-250
Middle-Zone 2 Temperature 215-225
Rear-Zone 1 Temperature 195-205
Mold Temperature 30-50
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm

返回
顶部